TCT Asia Summit 2017
0 95 $0.00 - $95.00
Time: Wednesday, March 8, 2017 09:00 to Friday, 10 15:00
Location: Shanghai New International Expo Centre (SNIEC), China
Location: Shanghai New International Expo Centre (SNIEC), China
TCT ASIA SUMMIT
The TCT Asia Summit features 50 expert speakers across the three day event that will leave you inspired and eager to explore the wealth of information available at the event.The TCT keynote presentations will be delivered by the most inspirational and influential executives in the industry. The application stream sessions will present amazing stories from super users and industry leaders.
T. A. Grimm & Associates, Inc
Todd Grimm is 25-year veteran of the additive manufacturing/3D printing industry and is president of T. A. Grimm & Associates, an additive manufacturing consulting and communications company. Todd is a consultant, writer, author, speaker and advisor. He sits on the board of directors of ARC Group Worldwide and serves on the board of the Additive Manufacturing Users Group (AMUG) as its AM industry advisor.He currently serves as Chairman of the 3D Data Capture/Reverse Engineering tech group and has also been a member of the SME Rapid Prototyping Association's Peer Review Council. He has been an editorial advisor for TCT Magazine.
Manager of Material Research Center
In 2007, Dr. Changpeng Li received his Ph.D. Degree from University of California, San Diego, with the major in Physics, following which he continued postdoc investigations in University of Michigan, Ann Arbor, and General Motors Corporation. In 2010, Dr. Changpeng Li came back China and joined the Corporate Technology of Siemens Ltd., China, currently titled as Expert Research Scientist in the research group of Material Qualification and Coatings. Currently D. Li is responsible for the R&D and implementation of Siemens Ltd., China in the field of material and manufacturing technology , especially in the property evaluation and lifing prediction technologies of heat resistant super alloys and coating, and also the advanced manufacturing technologies, such as additive manufacturing.
Primary Designated Engineer
Shanghai Electric Group Co.,Ltd Central Technology
Zhang Qing Lei, Ph.D., professorate senior engineer, Peasants and Workers Democratic Party.Shanghai leading talent, Shanghai Subject Chief Scientist, model worker of Shanghai, Shanghai Youth high-end creative talent, Shanghai top ten scientific and technological innovation talent. Technology experts of Shanghai Electric Group Co.,Ltd., Primary Designated engineer of Shanghai Electric Group Co.,Ltd. Central Technology Institute, Vice Secretary-General of Shanghai Industrial Design Association，Professor of University of Shanghai for Science and Technology，Nanjing University of Aeronautics and Astronautics，director of Computer Integrated Manufacturing Systems，director of Shanghai Modern Design Law Research Association，Member of Shanghai Huangpu District the Youth Federation Committee，Member of the Shanghai Institute of automation，Shanghai young creative talent Association. Mainly engaged in the field of advanced manufacturing common, key and forward-looking technology research and development.
Transportation Systems, Design Engineering Manager
Honeywell Integrated Technology (China) Co., Ltd.
DMLS in Turbocharger
- AM Footprint of Honeywell
- DMLS in Turbocharger
- Opportunities and Challenges
Mike Tian now works as design engineering manager of Trasportation Systems in Honeywell China. Before joined Honeywell he worked in Saint Power Mould (Shanghai) Company and Shanghai Diesel Engine Co., Ltd as design engineer and casting process engineer. He has a nearly 20 years experience in mold, casting and addtive manufacturing.
MEDICAL & DENTAL
- Stress/Strain analysis
- Biomechanical design for 3D printing based personalized implants and brace
Professor Yubo Fan is the Director of National Research Centre for Rehabilitation Technical Aids of China，Dean of School of Biological Science and Medical Engineering, Director of Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education of Beihang University. He is the AIMBE Fellow, the past president of Chinese Biomedical Engineering Society, Chair of World Association for Chinese Biomedical Engineers (WACBE), Vice president of China Strategic Alliance of Medical Devices Innovation. He is the past AC member, International Federation for Medical and Biological Engineering（IFMBE）, and the past council member of World Council of Biomechanics（2002-2014）. Prof. Fan specializes in Biomechanics, Biomaterials and Rehabilitation Engineering.
Senior Technical Lecturer
Dr. Liu Zheng graduated from Shanghai Jiaotong University College of Stomatology and pusure advanced studies in Japan in 1999. In 2006, he became a guest lecturer of Shanghai Jiaotong University College of Stomatology and Shanghai Institute of Health Sciences，and focus on ceramic restoration. In 2007, Dr. Liu join the Foshion as technical director. He also went to BEGO and 3Shape for further study of CAD/CAM, implant restorations, telescopic denture and aesthetic effectiveness.
Principal Materials Engineer
Medtronic (Shanghai) Co. Ltd
Dr. Gina Geng ,Principal Materials Engineer of Medtronic Innovation Center, Master's tutor of University of Shanghai for Science and Technnology. She worked in bio material and medical device development fro 14 years, and was winner of Shanghai Talent Fundation , team lead of 2 national and Shanghai Science project , and member of dozen project and ASTM.
G.P. Tromans Associates
BiographyGraham has direct experience of working with additive manufacturing (AM) technologies for more than 25 years and has gained an unprecedented level expertise when it comes to working with real AM applications in the real world both technically and strategically. A consummate professional, Graham has been involved with AM technologies since 1989 when he was responsible for the development and technology application acceptance within Rover Group.
Since that time, Graham has worked with a multitude of industry-leaders including companies such as BMW, Aston Martin, Bentley Cars, Boeing Aircraft, British Aerospace, numerous F1 teams, Rolls Royce and Perkins Engines. In addition, he managed the set up of a completely new rapid prototyping (RP) facility for Land Rover and he was an advisor to Jaguar Cars in the setting up of its on-site RP facility.
Recognized around the world for his superior skills and knowledge in this technology area, Graham has been called upon to represent the UK Government’s Department of Trade and Industry on Overseas Science and Technology Expert Missions in both the USA and Japan. These missions involved considerations of the developments in AM technologies and applications thereof. He has presented numerous papers in the USA, Japan, Europe and the Far East. Moreover, Graham is currently Chair of the Additive Manufacturing Association in the UK.